Alpha® is excited to introduce a new industrial quality pneumatic stone cutter, called the PSC-150, which is equipped with a 2 hp motor, with a speed governor in the motor that regulates the air consumption according to the torque needed for the application. This regulation includes producing enough torque to cut 1-1/4” (3cm) stone slabs in one pass. In addition, Alpha® recognized the need for an industrial quality portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without time-consuming setup. Since it is a pneumatic powered motor, you can save the repair and maintenance costs of electric stone cutters when sink-hole cutting and groove-cutting for rodding applications. Alpha® offers a carriage that retrofits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination. The PSC-150 offers kink-free water and air hoses to improve the maneuverability of the stone cutter. The flexibility of the hoses helps reduce operator fatigue and improves the operation. To ensure a long maintenance interval, we also recommend using the manifold system that comes with a regulator and filter to catch the debris and moisture delivered by compressed air. The Alpha® PSC-150 comes with an Eclipse II 6” blade which is the recommended turbo blade for granite and engineered stone. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less.
| Specification | Data |
|---|
| Model | PSC-150 | | Air Pressure | 90 PSI (6.2 Bar) | | Air Consumption Min | 929 l/min 32 CFM / 1HP* | | Air Consumption Max | 48 CFM / 2HP | | No Load Speed | 8,500 RPM | | Air Inlet | 3/8” NPSM | | Water Inlet | 1/4” BSPP | | Arbor | 7/8” (22mm) | | Max. HP | 2.0 HP | | Cutting Disc Diameter | 6" (150mm) | | Weight | 10.3 lbs (4.6 kgs) | | Note: | *To control the amount of CFM required, use the reduced flow air inlet fitting 3001-0084 |
|
| Item | Quantity |
|---|
| Flanges | 3 | | Bolts (M6X30 Left) / (M6x20 Left) | 2 | | Side Handle | 1 | | Combination Wrench (9mm) | 1 | | Hex Wrench (5mm) | 1 | | Open End Spanner Wrench (22mm) | 1 | | Air Hose (15ft / 4.5m) | 1 | | Water Hose (15ft / 4.5m) | 1 | | Rust Inhibitor Oil (8oz / 237ml) (AIR-008) | 1 | | Alpha® Eclipse II 6" Blade (DEE006) | 1 | | Muffler | 2 | | Reduced Flow Air Inlet Fitting (3001-0084) | 1 | | Hook & Loop Strap | 2 |
|
